Power supply for effect pedals from CIOKS with 6 outlets. Two isolated sections with two outlets each gives you 4 outlets in total with well filtered and regulated 9V DC. The last two outlets of which only one may be used are with respectively 9 and 12V AC (alternating current).
The most common examples of pedals running on alternating current are the Whammy from DigiTech, Hughes & Kettner's Tube Rotosphere or pedals with vacuum tubes from Electro Harmonix.
■(1) Cable-Blue/R right-angle 3.5 mm Phone Plug Jumper Cable for use with EH and other vintage pedals ■(1) Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack ■(1) Cable-Green/R right-angle Line-6 Jumper Cable ■(1) Cable-Grey Battery Clip Jumper Cables for pedals with no AC input ■(1) Cable-Red/R right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers!
และก็ยังแถมสายสำหรับ line6 มาด้วย (1) Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack